|
|
Wireless Fire Alarm System |
Fire Alarm System is designed to detect the presence of fire by monitoring the environmental changes and to provide an early warning of fire that will notify people to evacuate and take immediate action to stop fire. The fire alarm system can also be integrated with AHU, AC Supply, Access Control, BMS etc…. Alarm can be triggered either by Automatic Detectors or by Manual call Points in case of emergency.
Wireless Fire Alarm System gives you the joy of not having to use cables to connect and integrate with other Fire Alarm devices. Wireless Fire Alarm devices are powered by primary and secondary batteries and uses 499.92 Mhz radio frequency for both transmitting and receiving data. The Airlight Wireless Products are offered to cover various distances like 100 mtrs, 300 mtrs and 1 km (LOS).
|
|
|
|
|
Single Loop Wireless Addressable Fire Alarm Panel - ALAWFP100 |
Designed to provide origin of fire indication triggered by addressable detector/MCP, and to trigger
designated sounders to alert/evacuate the occupants, also to trip AHU, AC supply, etc. This unit is fully
addressable and it pin-points the exact location of fire for whose indication LCD display is provided. In
addition to the LCD, 16 zonal back-up LEDs are present. The unit is powered by 230V AC and for backup built-
in SMF battery charger is provided. This unit can be connected to 255 wireless addressable devices. The panel can be connected to PC for programming and can be integrated with graphics software.The panel enclosure ismadeof ABS and it is aesthetic, sleek, compact to position as front office products.
|
|
|
Wireless Addressable Optical Smoke Detector - ALWSD700 |
Works on photoelectric detection of light scattered by smoke particles. Apart from sensor, the unit consists of
wireless transmitter and 9 volt battery. The built-in LED blinks every 30 seconds to indicate the unit is
operational, it glows steady when it is in alarm mode. It automatically resets when smoke is not present. When
it is in alarm mode, the unit communicates the signal to the alarm panel with its address. The unit also
communicates battery low warning signal to alarm panel with its address, enabling the user to replace the
battery
|
|
|
|
Wireless Addressable Heat Detector - ALWHD700 |
Designed to provide heat detection using a thermistor which responds to rise in ambient temperature. Apart
from the sensor, the unit consists of wireless transmitter and 9 volt battery. The built-in LED blinks every 30
seconds to indicate the unit is operational, it glows steady when it is in alarm mode. It automatically resets
when the temperature decreases to the preset level. When it is in alarm mode, the unit communicates the
signal to the alarm panel with its address. The unit also communicates battery low warning signal to alarm
panel with its address, enabling the user to replace the battery.
|
|
|
|
Wireless Addressable MultiSensor - ALWMD700 |
Designed to provide level of smoke and accurate temperature existing in the ambient air along with its
address. Apart from sensor, the unit consists of wireless transmitter and 9 volt battery. The built-in LED blinks
every 30 seconds to indicate the unit is operational, it glows steady when it is in alarm mode. It automatically
resets when smoke is not present and/or when the temperature decreases to the preset level. When it is in
alarm mode, the unit communicates the signal to the alarm panel with its address. The unit also
communicates battery low warning signal to alarm panel with its address, enabling the user to replace the
battery.
|
|
| |
|
|
Wireless Addressable Manual Call Point - ALWMC700 |
Designed to trigger alarm manually. In case of fire, the person has to lift the protective flip cover and press the
glass which activates the MCP’s internal micro-switch, signaling an alarm to the fire alarm panel. The unit
consists of wireless transmitter and dual 3.6 volt lithium ion batteries. The built-in LED glows for the moment
when the micro-switch is activated. Transparent, strong, polycarbonate-made protective flip cover makes it
double action to prevent accidental operation.
|
|
|
Wireless Addressable Sounder - ALWHR700 |
Designed to provide audible alarm to alert/evacuate in case of fire. The unit has unique address & it accepts
two different signals, ie Alarm ON & Alarm Silence. The unit is powered by 230Volts AC supply and has built-in
SMF battery and charger. Wireless receiver with antenna provided to receive signal. In case of alarm, Fire
window flashes along with built-in hi-intensity peizo based sounder making alarm. Low battery LED indication
provided monitor battery indication. The entire unit is housed in sleek, compact, aesthetic ABS enclosure. This
unit can also be used as single zone panel.
|
|
|
|
Wireless Addressable Siren - ALWSR700 |
Designed to provide audible alarm for industries, warehouse (where high decibel alarm is required) to
alert/evacuate in case of fire. The unit has unique address & it accepts two different signals, ie Alarm ON &
Alarm Silence. The unit is powered by 230Volts AC supply and has built-in SMF battery and charger along with
horn. Wireless receiver with antenna provided to receive signal. In case of alarm, Fire window flashes along
with External horn. Low battery LED indication provided monitor battery indication. The entire unit is housed in sleek, compact, aesthetic ABS enclosure. This unit can also be used as single zone panel.
|
|
|
|
Wireless Addressable Relay Module - ALWRM700 |
Designed to operate sounder, strobes, electrical equipment shutdown by command from the panel in case
of fire or provides a set of voltage-free changeover contacts suitable for control variety of electrical
equipment. The unit has unique address and is powered by 230Volts AC supply and has built-in SMF battery
and charger. Wireless receiver/transmitter with antenna provided to receive/transmit signal. Low battery LED
indication provided monitor battery indication. The entire unit is housed in sleek, compact, aesthetic ABS enclosure.
|
|
|
|
Wireless Addressable Signal Repeater Unit - ALWSTU700 |
Designed to extend the range of remote wireless devices whose signal is not of enough strength to
communicate with the control panel over a certain range of distance. The unit has unique address and is
powered by 230Volts AC supply and has built-in SMF battery and charger. Wireless receiver/transmitter with
antenna provided to receive/transmit signal. Low battery LED indication provided monitor battery indication.
The entire unit is housed in sleek, compact, aesthetic ABS enclosure.
|
|
|
| Airlight Graphics Software - ALGRS701 |
Designed to be integrated with fire alarm system to provide clear & precise real-time information of alarm on
PC work station with use of text, floor & map. The graphics software makes it easy for the user to locate
affected area to enable them to make efficient response to emergency by constantly monitoring incoming
alarm/trouble data. In case of alarm/trouble the particular floor plan will pop-up automatically and the
respective triggered device will flash with change of colour & will provide clear text message of zone no.,
device no. and description of device location. The software also has a password protection feature that allows only authorized personnel to login/logout/change password.
|
|
|
|
Wireless To Wired Interface Unit - ALWAM400 |
Designed to be used for wireless devices (such as, MCP, smoke detector, input devices, etc) to wired panel communication. It gives the user the flexibility to extend the scope of the system by integrating wired & wireless
system. Wireless receiver/transmitter with antenna provided to receive/transmit signal. The unit has a unique
address and low battery LED indication provided monitor battery indication. The entire unit is housed in sleek,
compact, aesthetic ABS enclosure.
|
|
|
|
Wired To Wireless Interface Unit - ALAWM400 |
Designed to be used for wired addressable panel to wireless devices (such as, hooter, relay module, output device, etc) communication. It gives the user the flexibility to extend the scope of the system by integrating
wired & wireless system. Wireless receiver/transmitter with antenna provided to receive/transmit signal. The unit
has a unique address and low battery LED indication provided monitor battery indication. The entire unit is
housed in sleek, compact, aesthetic ABS enclosure.
|
|
|
|
|